Skip to content Skip to footer

Bafang Rear Hub Motor kit – 250W – 26 / 27.5 / 700c wheel sizes and up to 9 speed

£399.99 inc VAT

Available on back-order

Please choose your wheel size. If in doubt, it will be written on the side of your tire.

SKU: MRHK25026 Category: Product ID: 4226


This is a drop in rear wheel replacement. You’ll need to swap over your (up to) 9 speed cassette, fit the controller in the provided box and connect up the motor, PAS sensor, battery, break sensors and display. After connecting the battery you’ll have a 250W UK legal eBike!

If you are not confident fitting this, then we suggest you order via our custom fitting service.

Key information:

  • Bafang 36V  Rear Permanent Magnet  E-Bike DC motor
  • Suitable for 160mm disk brakes
  • 145 – 142mm cassette size – suitable for up to 9 speeds. Not suitable for traditional freewheels
  • Wuxing thumb throttle (may be used on both sides)
  • KT 36V 250W 6Mosfets 15A Brushless DC Sine Wave Controller and black controller mounting box
  • Colour P850C display
  • All required cables

Can I fit a 48V or 52V battery?

No, this is a 32V  motor. Fitting a battery with a higher voltage will be rather terminal for your motor.

Will this motor fit my bike?

This is designed to fit bikes with a 26 / 27.5 or 700c  rear wheel. Check the text on your tire for the wheel size. If it says 26 x  then it is a 26″ wheel. It’s also designed for up to 9 speed speed rear hubs. These wheel are great if you are unable to fit a mid drive motor.


1 year warranty based on purchase date. Please return to us for repair or replacement.

UK Legal Status

This is fine for both on road or off road use. It is fully UK road legal.


Additional information


Motor Type





Waterproof Grade


There are no reviews yet.

Be the first to review “Bafang Rear Hub Motor kit – 250W – 26 / 27.5 / 700c wheel sizes and up to 9 speed”

Your email address will not be published. Required fields are marked *